11
4. Once the water starts to boil, remove the kettle (2) from the base (3). The power indicator
(5) will turn off.
5. Press the On/Off switch (4).
6. Unplug the power cord.
• Ensure that the power switch is in the "Off" position before and after each use.
• If you find drops of water under your kettle, don’t worry – it is just condensation.
Note: empty the kettle after each use.
Descaling
• Regular descaling of the flat element will improve the performance of your kettle. If the kettle
is not descaled regularly the build up of limescale may result in the following:
- The kettle may take longer to boil.
- The flat element may be damaged.
Please note: Not descaling your kettle may invalidate your guarantee.
When lime scale starts to build up on the heating element:
- Buy a suitable descaler from a super market and descale your kettle following the
instructions mentioned on the descaler packaging.
- After descaling, boil with fresh water several times and discard.
- Clean any descaler off the kettle – it can damage the parts.
• Some regions of the country have chalky water. This makes boiled water look cloudy and
leaves deposit on the side of the kettle. This is normal but can be removed with regular
cleaning.
• Alternatively, to reduce limescale build up, use filtered water to fill your kettle.
Care and Cleaning
• Before cleaning, unplug your kettle and let it cool down.
• The outside and power base: Wipe with a damp cloth, then dry. Never use highly corrosive
or abstractive cleaning agents. Never use metal scouring pads for cleaning.
• Inner surface: Clean under running water. Never use highly corrosive or abrasive cleaning
agents. Never use metal scouring pads for cleaning. Make sure the base of the kettle does not
get wet.
CAUTION: Never wash the kettle in the dishwasher.
Technical Specifications
Model: Kettle HARMANI CM-2039
Rated voltage / Frequency: 220-240V ~50-60Hz
Power: 730-870W
Max capacity: 250ml
To Next Page
Loading...
