Notes:
• While the ON/OFF indication light (20) is blinking continuously, the appliance is in the
temperature adjustment mode.
• While the appliance is in temperature adjustment mode, if no button is pressed within one minute,
the appliance will exit this mode and return to standby mode.
The appliance has a coffee bean grinding function. Before using this function, make sure that the
coffee grinder components are installed correctly.
Coffee grinder assembly
1. Insert the grinder wheel (A) into the socket (2) and tighten it clockwise.
2. Install the coffee grinder container (B) and screw as shown in the figure above. Align the positions
in the red circles, push it down and rotate it clockwise.
Grinding selection
You can adjust the degree of grinding according to your preference. The degree of grinding affects
the water flow and therefore the quality of the coffee.
To Next Page
Loading...
