• Make sure the appliance is switched off and unplugged before use.
NOTE: Smoke and odors may occur during first use.
1. Wash the parts of the appliance. See "Care and Cleaning" section.
2. Place the appliance on a clean, flat and heat-resistant surface.
3. Place the rack (4) in the bucket (5).
Note: Do not use the appliance without the detachable rack.
4. Insert the bucket in the reception without food until it snaps into place.
Note: If the bucket does not fit well into the reception, the appliance will not turn on.
5. Plug in. A “beep” will be heard and the power button (23) will remain on.
6. Press the power button (23). A “beep” will sound and all the indication lights on the display screen
(10) will turn on.
7. Press “MATCH COOK” button (20). The indication light will flash.
8. Press the “PREHEAT” button (14) The indication light will flash and on the display screen the
preset temperature 150
ο
C and the preset time 15 will alternate.
9. Set the temperature 200
ο
C by pressing the temperature adjustment button (9).
10. Set the time to 10 minutes by pressing the time adjustment button (13).
11. Press “START/PAUSE” button (16) and the appliance will start. On the display screen (10) the
selected temperature and time will alternate.
12. When the selected program is finished, a “beep” will be heard 11 times. The indication lights will
turn off and the indication light of the power button (23) will remain on.
13. The appliance is ready for use.