J-Scale JZ115 User Manual

Thank you for purchasing the J-SCALE® JZ pocket scale. Please read all operating
instructions carefully before use. This electronic scale is a precision instrument.
With normal care and proper treatment, it will provide years of reliable service.
OPERATION
1. Place the scale on a horizontal at surface, press [ ] key to turn on the
scale. Hold [ ] for 3 seconds to turn o.
2. Wait until “0” is displayed.
3. Place the object(s) on the weighing platform.
4. Press [M] key to toggle the weighing units.
TARE
1. Turn on scale as described above.
2. Place the "tare item" on the platform.
3. Press [ ] and wait until "0" is displayed.
4. Add the "net-weight-item”.
5. Press [ ] again to return the scale to zero.
ENGLISH
USER MANUAL
Precision
0.1g
0.01oz
0.01ozt
0.1dwt
Capacity
560g
19.75oz
18ozt
360.1dwt
Precision
0.1g
0.01oz
0.01ozt
0.1dwt
Capacity
230g
8.12oz
7.4ozt
147.9dwt
Precision
0.01g
0.001oz
0.001ozt
0.01dwt
Capacity
115g
4.06oz
3.7ozt
73.9dwt

J-Scale JZ115 Specifications

Summary

Operation Guide

Turn On and Off Scale

Turn the scale on by pressing [O/T]. Hold for 3 seconds to turn off.

Wait for Zero Display

Ensure the scale displays "0" before proceeding to weighing.

Place Object on Platform

Position the item to be weighed on the scale's platform.

Toggle Weighing Units

Use the [M] key to switch between different measurement units.

Tare Function

Turn On Scale for Tare

Ensure the scale is powered on before initiating the tare function.

Place Tare Item

Position the container or item to be tared on the weighing platform.

Tare Scale

Press [O/T] to set the scale to zero with the tare item present.

Add Net Weight Item

Place the item whose net weight is to be measured onto the platform.

Reset Tare

Press [O/T] again to clear the tare and return the scale to zero.

Calibration Procedures

Calibrate JZ-115

Instructions for calibrating the JZ-115 scale using a 100g weight.

Calibrate JZ-230 and JZ-560

Steps to calibrate JZ-230 (200g) and JZ-560 (500g) scales.

Technical Specifications

Specifications Overview

Details on Tare Range, Operating Temperature, Power, Scale Dimensions, Tray Size, and Modes.

Display Error Messages

Information on error codes [88888] for Overload and [OUT2] for Recalibrate.