7
cable following the standard of direct interconnection method.
4.HDMI In: Connect to HDMI source device such as Blu-ray or PS4 player.
5.IR In: Channel 2 IR Receiver. Connect to an IR receiver cable.
6.IR Out: Channel 1 IR Transmitter. Connect to an IR emitter cable.
7.RS-232: Phoenix jack provide serial port control from transmitter to receiver.
8.Connection Signal Indicator Lamp
Illuminate: The Transmitter and Receiver are in good connections status.
Flashing: The Transmitter and Receiver are in poor connections status.
Dark: The Transmitter and Receiver are not connected.
9.Data Signal Indicator Lamp
Illuminate: HDMI signal with HDCP.
Flashing: HDMI signal without HDCP.
Dark: No HDMI signal.
To Next Page
Loading...
Need help?
General
