Need help?Do you have a question about the j5 create ULTRA JUD500 and is the answer not in the manual?
General| Brand | j5 create |
|---|---|
| Model | ULTRA JUD500 |
| Category | Docking Station |
| Compatibility | Windows, macOS |
| Power Delivery | Up to 60W |
| Host Interface | USB-C |
| Display Output | HDMI |
| Maximum Resolution | 4K@30Hz |
| Ports | USB Type-C, USB Type-A, HDMI, Ethernet, Audio |
| Ethernet | Gigabit Ethernet |
| Audio | 3.5 mm Audio Combo Jack (Headphone & Microphone) |
Insert the driver CD into the drive; the setup program should launch automatically.
Insert the driver CD and run the .dmg file to load drivers into the 'mac_install' folder.
Plug the Power Adapter to Port 1 and connect the USB 3.0 cable to Port 2 and the host laptop.
Connect the wormhole port to a USB port on the second computer to start software installation.
Connect the Wormhole Switch to the MAC computer; a 'Keyboard Setup Assistant' window will pop up.
Explore extended, mirror, and primary display modes, and display orientation.
Configure keyboard/mouse sharing, clipboard sharing, and file transfer via utility icon.
Lists required operating systems, USB ports, CPU, RAM, and iPad connection kit.
Guides users to check the manual, online support, or telephone support for issues.
To Next Page