Step 1
If you have internet access it is highly recommended that you download the latest driver from www.j5create.com under Support &
Services –scroll down to the product’s driver you are installing and download the latest driver for your operating system. (Note: If you
have trouble downloading this driver your security settings may need to be adjusted to allow for “downloading from anywhere”.)
See also j5create JVAW53 Wireless Display HDMI Extender User Manual
Step 2
Choose the correct operating system for your system and follow the prompts to install the driver (you may have to click on Finder >
downloads and choose j5UsbDis-playAdapter to begin installation).
For v10.12 users: When the pop-up window appears click “Ok”. Then go to Security and Privacy > General and click on “Open
Anyway” to install the driver.
Step 3
Once initial installation has completed, click “Restart” to finish installing the software. After your computer has restarted, connect the
j5create USB Display Adapter to your display first and then to your computer. Now you are ready to use your j5create USB™
Display Adapter!
To Next Page
Loading...