6
Depth range "ft": The factory setting is "Auto".
speed adjustment, factory setting 90%, adjustment range 60-99%
The refresh rate is to adjust the screen shift time of the LCD screen.
The adjustment range is 0-9 seconds and the factory setting is 5
seconds.
“COMP Angle”is different from the compass calibration at power
on. The adjustment range is -30 to +30 degrees.
It is used to adjust the yaw of the boat. When theboat goes straight
to one side, it can be adjusted through this item. Adjustment range
-50-+50.
The right function key description:
①A/H key: Automatic/Manual conversion key. When the boat is in automatic navigation,
Manual operation is invalid. After pressing the A/H key, the following options
At this point, press the "S" key to continue the automatic navigation. If you press “►”
key to select "N", the automatic navigation function will exit and the manual function
will be restored.
② M key: screen mode conversion. The remote control has 2 screen modes:
1 Navigation mode, which displays information such as the
coordinates of the bait boat, driving status, power of the remote
control, battery power of the boat, and the distance to the target
point and starting point.
2 2Fish finder mode: display the signal strength, theboat’s
driving status, the power of the remote control, the power of the
boat
’s battery, and the water depth, water temperature, and fish
symbol
To Next Page
Loading...
