Jabra Elite 5 Manual

Jabra Elite 5 - Titanium Black
How do I pair my Jabra Elite 5 with my mobile device?
To pair your headset with your handheld mobile device or tablet, follow
these steps.
1. Turn on the Bluetooth setting on your mobile device.
2. Turn on your earbuds by removing them from the charging case.
Alternatively, press the Left and Right buttons.
The LEDs on both earbuds will turn green.
3. To enter pairing mode, simultaneously press and hold (3 seconds) the
Left and Right buttons on the earbuds, until the LEDs on the earbuds
flash blue.
The earbuds are now ready to pair with your mobile device.
Note
If you want to use just one earbud, you must still pair both earbuds
with your mobile device. After the pairing, you can place one of the
earbuds in the charging case.
4. To pair, go to the Bluetooth menu on your mobile device and select
the Jabra Elite earbuds from the list. If the Jabra device is listed more
than once, select the entry showing the headphone icon. Enter
“0000” (four zeros) if you are asked for a pin code.
In daily use, when you turn on the earbuds, they will automatically
reconnect with the last previously paired device, if it is turned on and
within range.
16/01/2024 08:14
https://www.jabra.com/supportpages/jabra-elite-5/100-99181700-98/faq/a9030405-
4433-45ad-93a7-f86427d867e7
Page 1 of 2

Jabra Elite 5 Specifications

General

Size	S/M/L
Material	Silicone
Product type	Earbud tips
Product color	Beige
Brand compatibility	Jabra
Accessories included in set	Earbud Tips
Quantity per pallet	192 pc(s)
Master (outer) case width	228 mm
Master (outer) case height	205 mm
Master (outer) case length	280 mm
Master (outer) case weight	1252.8 g
Master (outer) case GTIN (EAN/UPC)	5707055057328, 30615822016507
Package depth	10 mm
Package width	60 mm
Package height	80 mm
Package weight	3.4 g