Need help?Do you have a question about the Jabra GN9330 - Headset - Over-the-ear and is the answer not in the manual?
General| Wireless Technology | DECT |
|---|---|
| Noise Cancellation | Yes |
| Product Type | Headset |
| Wearing Style | Over-the-ear |
| Wireless Technology Version | DECT 6.0 |
| Microphone | Yes |
| Range | Up to 100 meters |
| Wireless Range | Up to 100 meters |
| Connectivity | Wireless |
| Compatibility | Desk Phone |
Connects the headset to the telephone's dedicated port for call button functionality.
Sets default calling media between telephone and USB for VoIP applications.
Enables remote answering/ending calls using an optional handset lifter accessory.
Connects an accessory to indicate call status visually on the desk.
Controls and displays headset settings like volume, hookswitch, range, sound, and protection.
Adjusts microphone output level for clear voice transmission.
Configures remote call control based on telephone system compatibility (RHL, EHS).
Selects between Normal, Low, or Very Low power modes to adjust headset range.
Adjusts audio EQ (Treble/Normal/Bass) and USB sound quality (Fixed/Switch).
Sets protection levels against loud sounds based on daily phone usage hours.
Describes how to wear the headset with a headband, including ear placement.
Details wearing the headset using an optional neckband accessory.
Explains how to wear the headset with an ear hook for comfort and fit.
Provides instructions for interchanging different headset wearing style attachments.
Allows reconfiguring volume control orientation for left or right ear wearing.
Guides on initiating and terminating calls using RHL or EHS features.
Details how to answer incoming calls remotely via RHL or EHS.
Explains how to set up and manage conference calls with multiple headsets.
Describes how to make emergency calls using VoIP applications when connected to a PC.
Instructions for transferring an active call from the headset to the desk phone handset.
Procedure to transfer an ongoing call from the handset to the headset.
Steps to pair a new headset to the existing base unit.
Instructions for attaching an accessory to charge an additional battery.
Steps for removing and installing the headset's battery pack.
Lists audio alerts on the headset for various functions and statuses.
Explains visual signals (LEDs) on the headset for pairing, adjustment, and mode status.
Details the meaning of visual indicators (LEDs) on the base unit for mode and battery status.
To Next Page
