Jabra GN9350e User Manual

Jabra GN9350e
How to connect my Jabra GN9350e with Alcatel IP Touch 4028
EE, 4038 EE, 4068 EE
Jabra GN9350e + Jabra LINK 14201-20
In combination with one of the following phones:
IP Touch 4028 EE
IP Touch 4038 EE
IP Touch 4068 EE
EE = Extended Edition
Connection:
Connect the EHS adapter to the GN9350e base as follows:
1. Insert the supplied RJ9 to RJ9 connection cable into the socket of your
Jabra GN9350 base marked "phone" and the other end into the socket
of the EHS adapter marked with the "phone" symbol.
2. Now connect the end of the RJ45 to RJ45 connection cable (EHS
adapter) marked in red with the socket of the EHS adapter marked with
"AUX" and the socket of your Jabra GN9350e base marked with "AUX".
3. Now connect the RJ9 to 3.5 mm jack connection cable marked white
"D" to the socket of the EHS adapter marked with "Headset/Handset"
and with the headset socket of your phone.
4. Now connect the RJ12 to RJ12 connection cable marked orange "A" to
the socket of the EHS adapter marked "COM" and the "bell" socket of
your phone.
Please note that full functionality is only available when all the colour-
marked parts of the cables are inserted into the EHS adapter, see photo.
28/06/2021 23:48
https://www.jabra.in/supportpages/jabra-gn9350e/9356-607-403/faq/53031b6e-3f3a-
4bbe-b9ce-2d0dc8a123ba
Page 1 of 4

Jabra GN9350e Specifications

General

Type	Wireless headset
Range	Up to 120 meters
Microphone	Yes
Wearing Style	Over-the-ear
Wireless Technology	DECT
Noise Cancellation	Yes
Connectivity	DECT
Compatibility	Desk phone
Earpiece	Single

Summary

Connect Jabra GN9350e with Alcatel IP Touch Phones

Physical Connection Steps

Connect the EHS adapter to the GN9350e base using specified cables and phone sockets.

Software and Base Configuration

Base and Software Settings

Configure Jabra GN9350 base to 'DHSG' and set phone switch to 'A' for optimal operation.

Headset Call Management

Answer and end calls using the headset's 'answer/end' button after the dial tone is heard.

Phone Setup Variations

Setup for Software Version 9.xx+

Configure phone settings for headset use, ensuring headset symbol appears on the phone display.

Setup for Software Version < 9.xx

Disable 'Force Headset' and activate headset socket for phones with software older than version 9.xx.

Ringtone Configuration for Dial Tone

Ensure dial tone is transmitted to the headset by selecting specific ringtones and internal/external settings.

Troubleshooting Dial Tone Transfer

Advanced Ringtone Settings Check

Verify specific phone settings like 'No sound', 'Progressive', and 'Beeps' are set to 'OFF' for dial tone.