Jabra GN9350e
How to connect my Jabra GN9350e with Alcatel Touch 4029,
4039
Prerequisite :
Jabra GN 9350 + Jabra Link 14201-09
In combination with one of the following phones:
IP Touch 4029
IP Touch 4039
Connection:
2-sided end:
Insert the RJ45 plug into the socket marked with "AUX" and the RJ10 plug
into the base socket of the Jabra GN9350 marked with the “phone”
symbol.
2-fold Y-coupling end:
Insert the 3.5 mm audio jack into the headset interface and the RJ12 plug
into the bell socket of the phone. Now insert the phone's phone cable
directly into the additional connector socket of the Y cable.
To Next Page
