transferred if one of the following ringtones has been selected:
Standard / Classic / Cold River / Dooing-Dooing
(Select ringtone from Menu>Settings>Ringtone>Internal/External)
If you have set the correct ringtone and you still do not have a ringtone
signal, check the following settings:
Menu>Settings>Phone>Internal/External>additional optionsThe following
options need to be set to “OFF”: No tone, Progressive, Beeps.
Calls using the headset can be connected/transferred as follows:
1. Dial the phone number
2. “Transfer” will now appear on the phone display
3. Press the associated function button next to the phone display
4. End the conversation using the button marked, “Headset”
To Previous Page
Loading...
Need help?
General
