How do I pair my Jabra Halo Smart with my mobile device?
To pair your Jabra Halo Smart with your smartphone, tablet, or other
mobile device, follow these steps.
1. Turn on the Bluetooth setting on your mobile device.
2. Turn off your Jabra Halo Smart by pressing and holding the Multi-
function button until the LED flashes red.
3. To enter pairing mode, press and hold (7 seconds) the Multi-function
button until the LED flashes blue (minimum of 4 flashes).
Pairing mode is announced in the earbuds and the LED continues to
flash blue.
4. To pair, go to the Bluetooth menu on your mobile device and select
the Jabra Halo Smart from the list.
https://www.jabra.ie/supportpages/jabra-halo-smart/100-98300000-
60/faq/94c751f4-38e5-40c6-a334-57781241bde8
Page 1 of 2
To Next Page
