Jack Lananne's Power Juicer Elite User Manual

Operating Manual

Jack Lananne's Power Juicer Elite Specifications

General

Brand	Jack Lananne's Power Juicer
Model	Elite
Category	Juicer
Language	English

Summary

Important Safety Information

General Safety Precautions

Essential safety guidelines for operating the Power Juicer, covering electrical safety and personal injury prevention.

Assembly/Main Unit

Step 1: Base Placement and Locking Bar

Placing the juicer base on a flat surface with the locking bar in the down position.

Step 4: Securing Blade with Filter

Step 7: Juice Spout Positioning

Step 2: Receptacle Alignment

Positioning the receptacle on the base, aligning the spout with the locking bar.

Step 5: Pulp Collector and Safety Switch Engagement

Step 8: Locking the Lid Mechanism

Step 3: Filter Installation on Base

Step 6: Lid with Pulp Guard Attachment

Step 9: Pusher Insertion into Chute

Troubleshooting

Motor Not Running

Solutions for issues where the motor does not start after being switched on.

Motor Noise and Shaking

Addresses problems related to loud noise and excessive shaking during operation.

Motor Overheating

Troubleshooting steps for when the motor overheats and automatically shuts off.

No Juice Output

Resolving issues where the motor runs but no juice is produced from the spout.

Unit Assembly Issues

Diagnosing why the unit may not spin when power is turned on despite assembly.

Juice Leaking or Splashing

Solutions for juice leaking from the receptacle or splashing from the rim.