Why is my Jack Lananne's Power Juicer motor running loudly and shaking?
If your Jack Lananne's Power Juicer motor is running with loud noise and shaking, ensure that all parts are assembled correctly and in the correct position. Juicing overripe fruit can also cause excessive pulp, clogging the filter. If this happens, turn the machine off and clean the filter.
How to fix a Jack Lananne's Power Juicer when the motor won't run?
If your Jack Lananne's Power Juicer motor doesn't run after being switched on, check the following: 1. Ensure the unit is plugged in. 2. Verify the locking bar is properly locked in place. 3. Confirm all parts are assembled correctly. 4. Check for residue between the blade and receptacle. 5. Make sure the pulp collector is properly assembled, as the safety MicroSwitch prevents operation if it's not in place. 6. Ensure the filter/blade is firmly secured. 7. Check if food is stuck to the bottom of the pusher.
General| Brand | Jack Lananne's Power Juicer |
|---|---|
| Model | Power Juicer Express |
| Category | Juicer |
| Language | English |
Essential safety rules and warnings to prevent injury and ensure proper product use.
Advice on preparing and juicing fruits and vegetables for optimal performance and output.
Detailed instructions for correctly assembling the juicer components before operation.
Procedure for safely taking apart the juicer for cleaning or storage.
Instructions on how to detach and clean the removable juice spout.
Identifies common issues and provides solutions for them.
To Next Page
