EasyManua.ls Logo

Jack JK-T718E - Page 22

Jack JK-T718E
66 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
16
BEFORE OPERATING YOUR LOCKSTITH MACHINE, PLEASE READ THIS
INDTRUCTION MANUAL CAREFULLY IN ORDER TO OPERATE IT IN THE
CORRECT AND EFFICIENT MANNERS.
运行中警告 CAUTIONS IN OPERATION
1.机器从滑轮的正面观察该逆时针方向旋转,注意不要让缝纫机反方向旋转
2. 在没有加油之前,不允许开动机器
3 . 在试运行前,请从机器中拿出线轴箱和针线
4 . 每天在缝作之后应及时清理缝钩和机器线轴,另外应经常检查缝纫机油的油
5. 为防止人身事故的发,缝纫机在运行戒电机在转动过程中,请不要将指、头发、衣
等靠轮,也不要把任何东西放到机器上
6. 如果你的机器配有封带 为了保护你指和和眼睛,在进行操作前,请将它除去
1. The machine should rotate counterclockwise as observed from the pulley. Take care
not to rotate the machine in the opposite direction.
2. Never start the machine before filling the machine base with lubricating oil.
3. Remove the bobbin case and the needle thread from the machine before performing
the trial operation.
4. Clean up the sewing hook and the bobbin thread trimmer every day after sewing work.
Also check the level of the lubricating oil.
5. Never bring your fingers or hair close to, or place anything on the hand wheel during
operation. It may lead to serious peraonal injuries.
6. lf your machine is provided with a belt cover, finger guard and eye guard, never operate
your machine with any of them removed.
6: 规格 SPECIFICATION
781E
782E
783E
781EK
Application
般布料,针布料 的锁眼机
Buttonholing for ordinary cloth
knit
etc
锁眼宽
Buttonhole length
2. 5-4mm
2.5-5mm
2. 5-5mm
2.5-4mm
切刀长度
Bar-tack width
6. 4-19mm
( 1/4
"-
3/4
"
)
6. 4-25.
4mm
(1/4"-1")
6. 4-31.75mm
(1/4" 1 -11/4")
6. 4-19mm
(1/4"-3/4")
Needle
DPX5 #11J-#14J
压脚
Presser lift
12mm
使用机油
Lubricating oil
NO.1
新机油

Related product manuals