Jackson kayak Flex Drive 3D - Propeller Deployment and Operation Modes; Propeller Fully Retracted Mode; Propeller Mid-Position Mode; Propeller Fully Deployed Mode

4. Raise and Lower the Prop.
Beforelockingitdown,usethelevertoraiseandlowertheprop.Conrm
thepropisfullydeployedwhentheleverisintheupposition.Turnthe
pedalcranksforwardandbackwardtoconrmFlexDrive-3Disfunctioning
properly.CloseandlockdowntheCover.
Fully Retracted
(A) Fullyretractthedriveinveryshallowwaterwhereyouwillpaddleor
poleyourboat,whenlanding,whencleaningthepropandduring
transport.
Mid-Position
(B) Mid-positionisforoperationinshallowwater(approximately8”
depending on load), to pass over submerged logs and rocks, and
when it is desirable to run at lower speeds (when trolling, for instance).
Fully Deployed
(C) FulldeploymentofFlexDrive-3Disfornormaloperationindeeper
water and for pedaling at full speeds and covering water fast.
Close the scupper cover to prevent backwash from the prop.
4. raise and lower prop