EasyManua.ls Logo

Jackson kayak Flex Drive 3D - User Manual

Default Icon
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
OWNERS MANUAL
ASSEMBLY INSTRUCTIONS,
MAINTENANCE AND WARRANTY
PATENT NUMBER: 15/681,274
Question and Answer IconNeed help?

Do you have a question about the Jackson kayak Flex Drive 3D and is the answer not in the manual?

Summary

FlexDrive-3 D Unpacking and Contents

FlexDrive-3 D Package Contents

Lists all items included in the FlexDrive-3D package.

FlexDrive-3 D Replacement Parts

Identifies available replacement components for the FlexDrive-3D system.

Attach Crank Arms to Drive Unit

Connect Upper and Lower Drive Units

Secure Drive Unit to Kayak Deck

Propeller Deployment and Operation Modes

Propeller Fully Retracted Mode

Retract drive for shallow water, landing, cleaning, or transport.

Propeller Mid-Position Mode

Use for shallow water, obstacles, or trolling.

Propeller Fully Deployed Mode

Full deployment for deeper water and high-speed pedaling.

Kayak Rudder Control Operation

Transporting the FlexDrive-3 D Unit

How to Change the Prop Shear Pin

Routine FlexDrive-3 D Maintenance

Rinse and Clean Drive Unit After Use

Rinse the drive unit with fresh water after each use to prevent dirt and salt buildup.

Inspect Propeller for Grit and Sand

Periodically remove the prop and check for any grit or sand accumulation.

FlexDrive-3 D Re-greasing Procedure

Step-by-Step Grease Application

Add grease to drive unit grease holes using a grease gun, rotating arms.

Recommended Re-greasing Schedule

Re-grease after first use, first week, first month, or as needed.

Two Year Limited Warranty Details

Jackson kayak Flex Drive 3D Specifications

General IconGeneral
BrandJackson kayak
ModelFlex Drive 3D
CategoryBoating Equipment
LanguageEnglish