Jackson kayak Flex Drive 3D - FlexDrive-3 D Unpacking and Contents; FlexDrive-3 D Package Contents; FlexDrive-3 D Replacement Parts

unpack box
8mm
1/8” 3mm3/32”
(A)
(B)
(C) (D)
(E) (F) (G)
(H)
(I)
(L) (M)
(J)
(K)
Unpacking your FlexDrive-3D.
Your package should contain:
(A) (1) Upper Drive Unit
(B) (2) Pedal Cranks
(C) (2) Crank Arm Bolts
(D) (2) T-bolts and Thumb Screws
(E) (1) 3/32” Allen Wrench
for Output Drive Coupling
(F) (1) 1/8” Allen Wrench for
Grease Screws
(G) (1) 3mm Allen Wrench for
Prop Screw
(H) (1) 8 mm Allen Wrench
(I) (1) Single Use Loctite
(For Crankarm Bolts)
(J) (1) Grease Gun
(K) (1) Finish Line Grease
Replacement Parts
(L) (1) Spider Coupling
(M) (1) Prop Shear Pin
REPLACEMENT PARTS