! "#$%&'!(#))*+!((,! !
CAUTION: To avoid injury and ensure your safety, be sure to get the
appropriate number of people to help you move the ladder to its final
location. A fully assembled Jacobs Ladder X is very heavy and you might
injure yourself if you move the ladder improperly.
If you need to move the ladder, ask for assistance. Roll the ladder on its rear
transport wheels to its new location by slowly tipping the ladder back to engage
the wheel. Be sure to have assistance as ladder is heavy. Additional help
supporting the front end of the ladder will improve the ease of movement.
Make sure that the ladder is unplugged. Do not assemble the ladder if it is plugged
into a power outlet.
3. Once you have the unit positioned where you would like it, pull the stabilizer
bars out of the unit and lock them in place in the extended position.
4. With the 3/16” Allen Wrench and screws provided(in the owners packet), install
the Cup Holders provided on the left and right side of the unit on the outside of the
side handles.
To Next Page
Loading...
