! "#$%&'!(#))*+!((,! !
2.) Attach the Waist Belt to your waist, placing the strap off the center of
your back
3.) Push START button to turn display
4.) Set your weight using the UP and DOWN buttons (located near the cup
holder on the users left side of the machine). Press ENTER when
complete
5.) Step onto the machine and begin climbing. Accelerate slowly to let the
machine adjust to your speed. You may want to start out using the side
handles until you get used to the movement.
6.) In order to stop, simply stop climbing and coast to the bottom.
Assembly Instructions
Take the following steps to assemble the Jacobs Ladder.
1. Unpack the ladder and remove the packing materials from the base and
upright/console assembly. Do not discard the Owners Packet or the Cup Holders
which should come attached to the rungs with zip ties.
2. Unbolt the ladder from the pallet, secure the stabilizer bars so they are stowed
inside the unit and roll the unit on to the floor.
To Next Page
Loading...
