To Next PageTo Next Page
Need help?Do you have a question about the Jacobsen AR 250 Turbo and is the answer not in the manual?
General| Brand | Jacobsen |
|---|---|
| Model | AR 250 Turbo |
| Category | Lawn Mower |
| Language | English |
General guidelines for safe and proper operation and maintenance of the machine.
Details on machine name, serial number, manufacture year, weight, and engine power.
Procedures for handling hazardous materials and containing spills during the machine's service life.
Procedures for decommissioning, disassembling, and disposing of the machine at end of service life.
Essential instructions for safe operation of the machine, ensuring operator understanding.
Importance of maintaining legible safety labels and replacing missing or illegible ones.
Pre-operation checks and safe procedures for starting the engine.
Guidelines for safe driving, speed control, and awareness of surroundings and bystanders.
Procedures and safety precautions for safely transporting the machine.
Procedures for safely parking and leaving the machine unattended, including stopping the engine.
Precautions and limitations for operating the machine on slopes, including avoiding sliding.
Safe procedures for clearing blockages in cutting cylinders, keeping body parts clear.
Safety guidelines for performing adjustments, lubrication, and maintenance on the machine.
Warning about hydraulic fluid pressure penetrating skin and requiring immediate medical assistance.
Warning about battery hazards like explosive gases and corrosive acid, and high electrical current.
Warning about chemicals in engine exhaust and vehicle components known to cause cancer/birth defects.
Prohibition against using the machine on slopes greater than 15 degrees.
Safety steps required before releasing transport latches, including raising units and stopping the engine.
Details about the Kubota diesel engine, including type, model, speed, and oil capacity.
Machine's frame, cutting unit drive, transmission, speeds, steering, brakes, and fluid capacities.
Physical dimensions of the machine, including width, height, length, and weight.
Measured vibration levels for whole body and hand/arm exposure according to ISO standards.
Specifies the maximum permissible working slope (15°) based on static stability measurements.
Details of the cutting units, including general setup, drive, control, blades, and height adjustment.
Specifies recommended engine oil, hydraulic oil, and grease types for the machine.
Performance metrics for cutting area per hour, including allowances for overlaps.
Lists EC declarations of conformity and compliance with various European directives.
Illustrations and identification codes for various safety decals found on the machine.
Illustrations and descriptions of instruction decals related to machine operation and maintenance.
Description of the starter key switch functions and positions.
Explanation of how to use the throttle control lever to adjust engine speed.
Instructions on how to adjust the rake angle of the steering wheel.
How to operate the forward/reverse traction foot pedal.
Functions of the neutral latch, including its role in starting the engine and pedal operation.
How the speed limiter lever controls cutting speed versus transport speed.
How to engage and release the parking brake using the pedal and lever.
Operation of the hydraulic lift lever for raising and lowering cutting units.
How to adjust cutting unit ground pressure using the handwheel for better slope climbing.
How to engage and disengage the cutting mechanism using rocker and foot switches.
Operation of the pedal to raise cutting units for transport.
Description of various indicator lamps and gauges on the instrument panel.
Location and function of the hourmeter for recording engine running hours.
How to use the key to release the bonnet latch.
Daily checks to perform on the machine before operation for safety and performance.
Explanation and testing of the safety interlock system to prevent unintended operation.
General procedures and precautions for operating the machine safely and effectively.
Step-by-step procedure for starting a cold engine, including preheating.
Instructions for operating the machine's forward and reverse drive system smoothly.
Procedures for lowering cutting units, engaging the mechanism, and starting to mow.
Steps to safely stop the engine, including idling for turbocharged engines.
Procedure for enabling the machine to be pushed manually, including speed limits.
Instructions on how to adjust the cutting height of the decks using pins and cotter pins.
General instructions for fitting, servicing, and using Grammer seats safely.
Details on adjusting operator weight, fore/aft, and backrest for GS85/90 seats.
How to adjust the GS85/90 seat for operator weight using the knob.
How to adjust the fore/aft position of the GS85/90 seat using the lever.
How to adjust the backrest of the GS85/90 seat using the release lever.
Details on adjusting weight, fore/aft, backrest extension, heater, and lumbar support.
How to adjust the air suspension seat for driver's weight using the lever and viewing window.
How to adjust the fore/aft position of the air suspension seat using the locking lever.
How to adjust the backrest extension on the air suspension seat.
How to turn the seat heater on and off using the switch.
How to adjust lumbar support for comfort by turning the knob.
How to fold and adjust the height of the armrests.
How to adjust the inclination of the armrests using the adjustment knob.
How to adjust the backrest angle of the air suspension seat using the locking lever.
Guidelines for cleaning and maintaining the Grammer seat and upholstery.
Chart detailing operator checks and workshop maintenance procedures at various intervals.
Detailed daily checks for oil levels, cooling system, and air filter.
Details of the guarantee period, terms, and conditions for workmanship and material defects.
Information about the network of authorized sales and service dealers and how to contact them.
