To Next PageTo Next Page
Need help?Do you have a question about the Jacobsen Fairway 250 JGZZ250 and is the answer not in the manual?
General| Drive Type | Hydrostatic |
|---|---|
| Number of Reels | 5 |
| Transmission | Hydrostatic |
| Deck Material | Steel |
| Turning Radius | 18 inches |
Details on the ROPS serial plate, including weight, date code, part number, and serial number.
Location of the ROPS serial plate on the machine.
Procedures for safe removal and disposal of hazardous materials during normal operation.
Guidelines for disassembling and disposing of the machine at the end of its service life.
Key principles for safe operation including reading manuals and operator responsibility.
Steps to take before operating the mower, including checks and protective gear.
Detailed descriptions corresponding to the safety decals shown.
Descriptions for the instruction decals related to machine operation.
Explanation of warning and status indicator lamps on the control panel.
Description of gauges and key switches for engine and system operation.
Explanation of the engine over-temperature warning and test switch.
Operation of switches for cutting units and parking brake engagement.
Operation of steering wheel rake and traction foot pedal.
Functionality of speed limiter, mechanical parking brake, and release valve.
Operation of joystick and hydraulic lever for controlling cutting unit lift.
Controls for counterbalance, cylinder speed, backlapping, transport, and bonnet release.
Schedule for engine maintenance tasks based on operating hours.
Procedure for adjusting the rear wheel toe-in alignment.
Procedure for adjusting the steering shaft for proper steering balance.
Adjusting the foot brake and brake bands for equal braking and proper clearance.
How to adjust the seat for operator weight using the control knob.
How to adjust the seat's forward and backward position.
How to adjust the backrest to different lock positions.
Procedure for adjusting seat weight for driver, ensuring safety system function.
How to adjust the front and back position of the air suspension seat.
How to adjust or remove the backrest extension on the air suspension seat.
How to turn the seat heater on and off using the switch.
How to adjust the lumbar support curve in the seat cushion.
How to adjust the height of the armrests by loosening the hexagon nut.
How to change the angle of the armrests by turning the adjustment knob.
How to adjust the backrest angle using the locking lever.
Identifying and resolving washboarding patterns in the cut grass.
Identifying and resolving marcelling patterns in the cut grass.
Identifying and resolving step cutting patterns caused by uneven cutting units.
Identifying and resolving scalping conditions in the cut grass.
Identifying and resolving stragglers (uncut or poorly cut grass blades).
Identifying and resolving streaks (uncut lines) in the grass.
Identifying and resolving windrowing (clipping deposits) in the grass.
Identifying and resolving rifling or tramlining patterns in the cut appearance.
Identifying and resolving issues caused by mismatched cutting unit height adjustments.
