Jacobsen Fairway 71105 User Manual

7HFKQLFDO
0DQXDO
WARNING:If incorrectly used, this machine can cause severe injury. Those who
use and maintain this machine should be trained in its proper use, warned of its
dangers and should read the entire manual before attempting to set up, operate,
adjust or service the machine.
Part No. 366296-Rev D
GB
Fairway Mower
71105 - 30 Inch, 6 Blade Fairway Mower
71351 - 30 Inch, 10 Blade Fairway Mower

Jacobsen Fairway 71105 Specifications

General

Engine	Kubota Diesel
Horsepower	24.8 hp
Cutting Width	100 inches
Number of Reels	5
Engine Type	Diesel
Transmission	Hydrostatic

Summary

Safety

2.1 Operating Safety

Detailed safety guidelines for operating the fairway mower.

2.2 Important Safety Notes

Key safety definitions (Danger, Warning, Caution) and essential precautions.

Specifications

3.1 Product Identification

Information to identify the specific mower model and serial number.

3.2 Mower Specifications

Technical details including cutting width, reel diameter, and drive type.

3.3 Accessories and Support Literature

List of available accessories and relevant support documents.

Controls

4.1 Controls Overview

Identification of main control components on the mower.

4.2 Control Descriptions

Explanation of the function for each mower control.

Operation

5.1 Daily Inspection

Procedures for daily checks before operating the mower.

5.2 Operating Procedures

Step-by-step instructions for safe and effective mower operation.

5.3 To Drive / Transport

Guidelines for driving and transporting the mower safely.

5.4 Mowing

Procedures and tips for efficient and safe mowing.

Adjustments

6.1 General Adjustments

General safety and procedural notes before making adjustments.

6.2 Bedknife Adjustment

Instructions for adjusting the bedknife for optimal cutting.

6.3 Reel Bearing Adjustment

Steps for adjusting the reel bearing for proper function.

6.4 Wheel Bearing Adjustment

Procedure for adjusting the wheel bearing to prevent wear.

6.5 Height of Cut Adjustment

How to adjust the cutting height using roller brackets.

Maintenance

7.1 General Maintenance

Overall guidelines for maintaining the mower's condition and longevity.

7.2 Blade Sharpening

Recommendations for sharpening reel and bedknife blades.

7.3 Tires

Specific instructions for mounting and maintaining tires.

7.4 Care and Cleaning

Procedures for cleaning and caring for the mower after use.

7.5 Storage

Steps for properly storing the mower during off-seasons.

Lubrication

8.1 General Lubrication Practices

Best practices for lubricating all mower components.

8.2 Gear Housings Lubrication

How to lubricate the gear housings.

8.3 Wheel Lubrication

Guidelines for repacking and lubricating wheel bearings.

8.4 Bedknife Adjusting Handle Lubrication

Instructions for lubricating the bedknife adjusting handles.

Parts and Assemblies

1.1 Frame Assembly

Exploded view and parts list for the mower's frame assembly.

2.1 Rear Roller Assembly

Exploded view and parts list for the rear roller.

3.1 Drive Clutch Assembly

Exploded view and parts list for the drive clutch components.

4.1 Reel and Bedknife Assembly

Exploded view and parts list for the reel and bedknife.

5.1 Drive Wheel Accessories

Exploded view and parts list for drive wheel options.