EasyManua.ls Logo

Jacobsen Fairway 305 Turbo User Manual

Jacobsen Fairway 305 Turbo
144 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Safety Operation and Maintenance Manual
Priročnik za varnost, upravljanje in vzdrževanje
WARNING: If incorrectly used this machine can cause
severe injury. Those who use and maintain this machine
should be trained in its proper use, warned of its dangers and
should read the entire manual before attempting to set up,
operate, adjust or service the machine.
GB
United
Kingdom
RJL 100 May / Maj 2010
24493G-SI (rev.2)
Jacobsen Fairway 305 Turbo Ride on Reel Mower
Jacobsen Fairway 305 Turbo Sedežna kosilnica
Series: CG2 - Engine type: Kubota V1505-TTB-EC-1-S1
Product code: JGPP010T
Serija: CG2 - Vrsta motorja: Kubota V1505-TTB-EC-1-S1
Koda izdelka: JGPP010T
OPOZORILO: Pri nepravilni uporabi te kosilnice lahko pride
do hudih poškodb. Osebje, ki upravlja in vzdržuje to
kosilnico, mora biti usposobljeno za pravilno upravljanje,
opozorjeno na morebitne nevarnosti in mora pred
sestavljanjem, upravljanjem, prilagajanjem ali servisiranjem
kosilnice priročnik prebrati v celoti.
SI
Slovenia

Table of Contents

Questions and Answers:

Jacobsen Fairway 305 Turbo Specifications

General IconGeneral
Horsepower24.8 hp
Cutting Height0.5 - 4 inches
Speed Range0 - 10 mph
TransmissionHydrostatic
Turning Radius18 inches
Deck TypeFloating

Summary

Safety Instructions

Working on Slopes

Extra care on slopes, avoiding sliding, speeds, turns, and the warning about slopes > 15°.

Specifications

Slopes

Warning about not using on slopes greater than 15°, based on EN 836.

Controls

Operation

Daily Inspection

Performing visual checks of the unit, fluids, tires, and safety interlocks.

Operator Presence and Safety Interlock System

Tests for operator presence and safety interlock system functionality.

Operating Procedure

General operating procedures, safety precautions, and checks before operation.

Starting the Engine

Step-by-step procedure for starting a cold engine, including notes on warm engines and starter motor usage.

Driving

Procedures for driving, including brake release, forward/reverse, stopping, and pedal operation notes.

Mowing on Slopes

Caution for slopes, safe operation, speed, turns, and the warning about slopes > 15°.

Lubrication and Maintenance

Lubrication and Maintenance Chart

A table outlining maintenance intervals, items, and corresponding section numbers.

Daily Checks

Checks for oil levels, air filter, coolant, hydraulic fluid, safety interlocks, tire pressure, and debris.

Engine Oil & Filter

Procedures for changing engine oil and oil filter.

End of Season Maintenance

Procedures for changing hydraulic oil, filter, and coolant, and cleaning cutting units.

Adjustments

Height of Cut

How to set the rear roll parallel to the bottom blade and adjust the front roll for height of cut.

Troubleshooting

General Troubleshooting

A chart listing common problems, possible causes, and actions for engine and battery issues.

Quality of Cut Troubleshooting

Recommendations for performing test cuts and verifying settings before repairs.

Schematics

Related product manuals