To Next PageTo Next Page
Need help?Do you have a question about the Jacobsen LF Series and is the answer not in the manual?
General| Brand | Jacobsen |
|---|---|
| Model | LF Series |
| Category | Lawn Mower |
| Language | English |
Key operational and safety information for the Jacobsen LF550/LF570 mower.
Essential safety guidelines for operating the mower, including preparation and general rules.
Specific safety practices for operating the mower, covering slopes, bystanders, and general handling.
Safety precautions for ROPS, fuel handling, and maintenance/storage procedures.
Explains safety alert symbols, interlock system function, and pre-operation checks.
Detailed specifications for Kubota diesel engines used in the mower.
Physical dimensions, weight, and tire specifications for the LF550/LF570.
Key mower specs and detailed hydraulic circuit parameters.
Measured vibration and noise emission levels for operator safety and comfort.
Specifies slope operation limits, cutting unit details, and recommended lubricants.
Lists available accessories for the LF550/LF570 mower, including cutting units and rollers.
Information on obtaining additional manuals and support documentation for the mower.
Identifies and illustrates the main controls within the operator's compartment.
Detailed view and labeling of the armrest control panel functions.
Explains the function and operation of key control switches.
Describes the functionality of the PTO, horn, and lighting controls.
Details the joystick operation modes and the mower's alarm indicators and their causes.
Covers the 12V outlet and the adaptive throttle switch functions for T4F/Stage 5 engines.
Explains the LDU display, its modes, and the meaning of various indicator lights.
Details the various alarm and fault screens shown on the LDU and their associated problems.
Describes the operation and adjustment of traction pedal, steering wheel, and seat controls.
Covers adjustments for premium seats and the throttle lever for T4I engines.
Outlines the essential daily checks before operating the mower.
Explains the interlock system and provides tests to ensure its correct operation.
Comprehensive guide to operating the mower safely and effectively.
Step-by-step instructions for safely starting and stopping the mower's engine.
Guidance on driving, optimal mowing speeds, and the mowing process itself.
Critical safety advice and techniques for operating the mower on slopes.
Instructions for safely towing the mower, including bypass valve and brake release.
A comprehensive chart detailing maintenance tasks based on operating hours.
Visual guide to lubrication points and specifications for required fluids.
Safety guidelines for maintenance and how to access/use Maintenance Mode.
Procedures for setting maximum speeds, cruise control, and traction modes.
Monitoring switch status, resetting maintenance intervals, and backlapping reels.
Setting display units, exiting maintenance mode, and initial engine care recommendations.
Detailed steps for checking and changing the engine oil and filter.
Procedures for servicing the air filter and safe fuel handling.
Steps for draining water separators, replacing fuel filters, and bleeding the fuel system.
Safety precautions and procedures for battery maintenance and jump-starting.
Guidelines for safe battery charging and awareness of exhaust hazards.
Explanation of the DPF system, its states, and regeneration processes.
Procedures for inspecting hoses and changing hydraulic fluid and filters.
Instructions for replacing hydraulic filters and maintaining tire pressure.
Steps for safe wheel mounting and radiator maintenance.
Instructions and safety warnings for folding and using the ROPS.
Step-by-step guide for performing the backlapping procedure on mower reels.
Details the mower's electrical system, including circuit breakers, fuses, and relays.
Guidelines for cleaning the mower and its components to prevent damage.
Instructions for preparing the mower for storage and post-storage checks.
Precautions for adjustments and procedure for checking engine fan belt tension.
Steps for adjusting steering toe-in and the front reel limit switch.
Instructions for adjusting the height of standard and premium seat armrests.
Details on adjusting the armrest pivot and the critical bedknife-to-reel gap.
Procedures for adjusting the bedknife and setting the cutting height (HOC).
How to adjust down pressure springs to improve cutting performance.
Step-by-step guide for installing and removing cutting units using Flash Attach™.
Adjusting bedknife springs, tension, and procedures for grinding the bedknife.
A reference chart for various bolt torque values for assembly and maintenance.
A chart listing common mower problems, their causes, and solutions.
Information on the mower controller, its LEDs, and troubleshooting electrical issues.
How to diagnose and fix quality of cut problems, focusing on washboarding.
Identifies marcelling as a cutting defect and its probable causes and remedies.
Explains step cutting, its causes, and solutions for achieving an even cut.
Describes scalping, its causes like low HOC, and how to prevent it.
Addresses stragglers (uncut or poorly cut grass) and their solutions.
Explains streaks (uncut grass lines) and how to resolve them.
Details windrowing, the deposition of clippings, and remedies.
Discusses rifling/tramlining, a wave-like pattern in grass, and its causes.
Addresses issues arising from mismatched cutting unit adjustments causing stepped cuts.
