EasyManua.ls Logo

Jacobsen LF 3800

Jacobsen LF 3800
54 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Safety & Operation Manual
Turva- ja käyttö- opas
VAROITUS
Laitteen virheellinen käyttö voi aiheuttaa vakavia vahinkoja. Laitteen
käyttäjille ja huoltajille on opetettava laitteen asianmukainen käyttö, heitä on
varoitettava mahdollisista vaaroista ja heidän on luettava koko käyttöopas
ennen laitteen valmistelua, käyttöä, säätämistä ja huoltamista.
WARNING
If incorrectly used, this machine can cause severe injury. Those who use
and maintain this machine should be trained in its proper use, warned of its
dangers and should read the entire manual before attempting to set up,
operate, adjust or service the machine
When Performance Matters.
Lightweight Fairway Mower with ROPS
Kevyt kulkuväyläruohonleikkuri Fairway,
jossa ROPS
67971 – LF 3400
, Kubota V1505-E3B, 5 Gang, 2WD
67972 – LF 3400
, Kubota V1505-E3B, 5 Gang, 4WD
67958 – LF 3800
, Kubota V1505-E3B, 5 Gang, 2WD
67959 – LF 3800
, Kubota V1505-E3B, 5 Gang, 4WD
67960 – LF 3400
Turbo, Kubota V1505-T-E3B, 5 Gang, 4WD
67961 – LF 3800
Turbo, Kubota V1505-T-E3B, 5 Gang, 4WD
4179105-Rev.A-FI

Other manuals for Jacobsen LF 3800

Questions and Answers:

Jacobsen LF 3800 Specifications

General IconGeneral
Cutting Width76 inches
TransmissionHydrostatic
Number of Reels5
Fuel Tank Capacity12.5 gallons
Deck TypeFloating
Cutting Height0.25 - 1.5 inches
Speed Range0 to 8 mph

Summary

Safety

Operating Safety

Essential safety guidelines for operating the mower, covering awareness, training, and protective gear.

Important Safety Notes

Key safety warnings, hazard symbols, and precautions for machine operation and maintenance.

Decals

Decals

Explanation of critical machine decals for safe operation and immediate replacement of damaged ones.

Controls

Icons

Identification and explanation of dashboard icons and gauges for operation.

Controls

Detailed description of various control levers, pedals, and switches for mower operation.

Control Panel

Layout and function of the operator control panel, including switches and gauges.

Operator Alerts

Explanation of audible alarms and warning lights for system monitoring and immediate action.

Operation

Daily Inspection

Procedures for performing visual checks and fluid level inspections before daily operation.

Interlock System

Details on the safety interlock system and tests to ensure its proper functioning.

Operating Procedures

General guidelines for safe operation, including pre-operation checks and hazard avoidance.

Starting

Step-by-step instructions for safely starting the mower engine.

Stopping Parking

Procedures for safely stopping the mower and parking it under various conditions.

To Drive Transport

Instructions for driving the mower on roads and preparing it for transport.

Mowing

Steps to engage the mowing function and operate the cutting units.

Mowing Speed

Guidance on optimal mowing speeds for achieving quality cuts.

Towing Trailering

Procedures and precautions for towing or trailering the mower.

Hillside Operation

Safety precautions and operational techniques for mowing on slopes.

Daily Maintenance

Routine daily maintenance tasks, including cleaning, lubrication, and fluid checks.

Quality of Cut

Quality of Cut Troubleshooting

Guide to diagnosing and rectifying common issues affecting cutting quality.

Washboarding

Explanation of washboarding cut patterns and their probable causes and remedies.

Marcelling

Explanation of marcelling cut patterns and their probable causes and remedies.

Step Cutting

Explanation of step cutting patterns and their probable causes and remedies.

Scalping

Explanation of scalping grass and its probable causes and remedies.

Stragglers

Explanation of stragglers (uncut grass) and their probable causes and remedies.

Streaks

Explanation of streaks of uncut grass and their probable causes and remedies.

Windrowing

Explanation of windrowing (grass deposit lines) and its probable causes and remedies.

Rifling or Tramlining

Explanation of rifling/tramlining cut patterns and their probable causes and remedies.

Mismatched Cutting Units

Explanation of uneven cutting unit adjustments and their remedies.

Related product manuals