Jacobsen LF 4675 User Manual

Safety and Operation Manual
Manuel de l’opérateur et de sécurité
Bedienings- en Veiligheidshandleiding
Betriebs- und Sicherheitshandbuch
Manuale Operativo e di Sicurezza
LF 3400
TM
, LF 3800
TM
, LF4675
TM
, LF4677
TM
WARNHINWEIS: Wenn diese Maschine nicht ordnungsgemäß
verwendet wird, können ernsthafte Verletzungen verursacht
werden. Personen, die diese Maschine verwenden und
warten, müssen in ihrer richtigen Verwendung ausgebildet
sein, auf die Gefahren aufmerksam gemacht worden sein
und die Anleitung ganz gelesen haben, bevor sie versuchen,
die Maschine aufzustellen, zu bedienen, einzustellen oder
zu warten.
WAARSCHUWING: Bij verkeerd gebruik kan deze machine
ernstig lichamelijk letsel veroorzaken. Degenen die de machine
gebruiken en onderhouden moeten worden getraind in het
juiste gebruik ervan, worden gewaarschuwd voor de
gevaren ervan en behoren de volledige handleiding
aandachtig te lezen alvorens de machine bedrijfs-klaar te
maken, te bedienen, af te stellen en/of te onderhouden.
AVERTISSEMENT : Risque de blessures graves en cas
d’utilisation incorrecte de la machine. Les opérateurs et le
personnel d’entretien doivent être formés et conscients des
dangers encourus. Ils doivent lire avec attention le manuel
avant d’essayer de monter, d’utiliser, de régler ou maintenir la
machine.
WARNING: If incorrectly used this machine can cause severe
injury. Those who use and maintain this machine should be
trained in its proper use, warned of its dangers and should
read the entire manual before attempting to set up, operate,
adjust or service the machine.
4100740-ML1 (rev.0)
AVVERTENZA: Questa macchina può causare gravi infortuni
se viene utilizzata in modo errato. Prima di accingersi ad
approntare, usare, mettere a punto o eseguire la manutenzione
di questa macchina, coloro che la utilizzano ed i responsabili
della manutenzione devono essere addestrati all’impiego della
macchina, devono essere informati dei pericoli, e devono
leggere l’intero manuale.
LF 3400 Model: 2 WD 5 gang 67868 Serial No. 2800 & up & 4WD 5 gang 67869 Serial No. 2250 & up - Engine type: Kubota D-1305E
LF 3800 Model: 2 WD 5 gang 67866 Serial No. 2300 & up & 4WD 5 gang 67867 Serial No. 2300 & up - Engine type: Kubota D-1505E
LF 3400 Model: 4 WD 5 gang 67889 Serial No. 1670 & up - Engine type: Kubota V1505-TE
LF 4675 Model: 4 WD 7 gang 67915 Serial No. 1651 & up - Engine type: Kubota V1505-TE
LF 4677 Model: 4 WD 7 gang 67916 Serial No. 1651 & up - Engine type: Kubota V1505-TE

Jacobsen LF 4675 Specifications

General

Number of Reels	5
Engine Type	Diesel
Transmission	Hydrostatic
Speed Range	0-10 mph
Deck Type	Floating

Summary

SAFETY

OPERATING SAFETY

General safety guidelines for operating the machine, emphasizing proper use and awareness.

IMPORTANT SAFETY NOTES

Crucial safety warnings, hazard definitions (DANGER, WARNING, CAUTION), and precautions.

DECALS

CAUTION Decals

Safety decals providing cautions for operation and potential hazards.

DANGER Decals

Safety decals indicating severe hazard risks and potential for serious injury or death.

WARNING Decals

Safety decals highlighting potential hazards that could result in death or serious injury.

CONTROLS

ICONS

Visual symbols representing tractor controls, functions, and warning lights.

Component Labels

Identification and labeling of tractor parts and control panel elements.

Detailed Control Descriptions

Detailed explanations of specific controls from A to N.

Control Panel and Additional Controls

Layout of control panels and descriptions of controls Q through AB.

Operator Alerts

System alerts and warning lights indicating conditions requiring immediate action.

OPERATION

DAILY INSPECTION

Procedures for daily visual inspection and checks before operation.

OPERATING PROCEDURES

General guidelines for safe and effective tractor operation.

STARTING

Step-by-step instructions for starting the tractor engine.

STOPPING / PARKING

Procedures for safely stopping and parking the tractor under normal conditions.

TO DRIVE / TRANSPORT

Instructions for safely driving and transporting the tractor.

MOWING

Procedures for operating the mowing units effectively and safely.

MOWING SPEED

Recommendations for optimal mowing speed and quality.

TOWING / TRAILERING

Guidelines for towing and trailering the tractor.

HILLSIDE OPERATION

Safety precautions and procedures for operating on slopes.

DAILY MAINTENANCE

Routine maintenance tasks for daily checks and upkeep.