Jacobsen 67971 – LF 3400 User Manual (English)

Other manuals for Jacobsen 67971 – LF 3400

Questions and Answers:

B
Bonnie JonesAug 14, 2025
Why my Jacobsen Lawn Mower engine will not start?
- N
  Natalie BuckAug 15, 2025
  If your Jacobsen Lawn Mower engine won't start, several factors could be at play. Begin by verifying the interlock system and start-up procedure. Ensure the parking brake is engaged, the traction pedal is in neutral, and the mow switch is off. Also, allow the glow plug to time out by resetting the ignition switch before cranking the engine. Inspect the battery's condition and connections. Check if the fuel tank is empty or contains dirty fuel; if so, refill with fresh fuel, change the fuel filter, and bleed the fuel lines. Replace any blown fuses and test/replace any defective relays. Finally, check the neutral switch on the traction pedal for proper adjustment or defects, adjusting or replacing it as necessary.
A
Ashley ThompsonAug 18, 2025
What to do if my Jacobsen Lawn Mower engine is hard to start?
- D
  david99Aug 18, 2025
  If your Jacobsen Lawn Mower engine is hard to start or runs poorly, there are several things you can check. First, ensure that the fuel level is adequate and that the fuel and fuel filter are clean. If the fuel level is low, fill it with fresh fuel, change the fuel filter, and bleed the fuel lines. Inspect and replace the air filter if it's dirty.
M
Melissa AndersonAug 21, 2025
What to do if my Jacobsen 67971 – LF 3400 Lawn Mower engine is overheating?
- J
  jimjohnsonAug 21, 2025
  If the Jacobsen Lawn Mower engine is overheating, check the following: * Inspect and add coolant if the coolant level is low. * Clean the air intake at the radiator if it is restricted. * Tighten or replace the water pump belt if it is broken or loose.
Q
qgrahamAug 25, 2025
Why is my Jacobsen 67971 – LF 3400 Lawn Mower engine hard to start or running poorly?
- S
  Shannon CarterAug 26, 2025
  If the Jacobsen Lawn Mower engine is hard to start or runs poorly: * Fill with fresh fuel, change the fuel filter and bleed the fuel lines if the fuel level is low, or the fuel or fuel filter is dirty. * Inspect and replace the air filter if the air cleaner is dirty. * For issues related to the injectors or fuel pump, or for other engine problems, consult the engine manual.
B
bbatesAug 27, 2025
What to do if my Jacobsen 67971 – LF 3400 engine stops?
- L
  Lori WhiteAug 28, 2025
  If your Jacobsen Lawn Mower engine stops, make sure the fuel tank isn't empty; if it is, fill it with fresh fuel and bleed the fuel lines. Also, check that the interlocks are properly set before you leave the operator’s seat by engaging the parking brake and setting the mow switch to OFF.
B
Brian MorrowAug 31, 2025
Why is my Jacobsen Lawn Mower engine overheating?
- B
  Brian MooreAug 31, 2025
  If your Jacobsen Lawn Mower engine is overheating, start by inspecting the coolant level and adding coolant if it's low. Next, check for any restrictions in the air intake and clean the air intake at the radiator if necessary. Finally, inspect the water pump belt; if it's broken or loose, tighten or replace it.
K
karen44Sep 3, 2025
What to do if Jacobsen 67971 – LF 3400 Lawn Mower reels cut unevenly?
- P
  Patricia SanfordSep 3, 2025
  If the reels on your Jacobsen Lawn Mower are cutting unevenly, several adjustments can be made. First, inspect the bedknife-to-reel adjustment. Check if the engine speed is too low. Adjust the mow speed to suit the turf conditions for the best cut. Ensure the mow switch is set for forward rotation. If there's not enough rear roller pressure, move the down pressure spring one hole towards the spring. If the front roller isn't following undulations adequately, move the down pressure spring one hole away from the spring.