EasyManua.ls Logo

Jacobsen LF 4677 Turbo 67963

Jacobsen LF 4677 Turbo 67963
118 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
When Performance Matters.
Lightweight Fairway Mower with ROPS
Tondeuse de fairway légère avec protection au retournement (ROPS)
67963 – LF 4677
Turbo, Kubota V1505-T-E3B, 7 Gang, 4WD
WARNING
WARNING: If incorrectly used this machine can cause severe
injury. Those who use and maintain this machine should be
trained in its proper use, warned of its dangers and should
read the entire manual before attempting to set up, operate,
adjust or service the machine.
AVERTISSEMENT
AVERTISSEMENT : Risque de blessures graves en cas
d’utilisation incorrecte de la machine. Les opérateurs et le
personnel d’entretien doivent être formés et conscients des
dangers encourus. Ils doivent lire avec attention le manuel
avant d’essayer de monter, d’utiliser, de régler ou d’entretenir
la machine.
4179102-FR-Rev B
Safety, Operation and Maintenance Manual
Manuel de sécurité, de fonctionnement et de maintenance
RJL 100 August 2014
FR
France

Table of Contents

Questions and Answers:

Jacobsen LF 4677 Turbo 67963 Specifications

General IconGeneral
BrandJacobsen
ModelLF 4677 Turbo 67963
CategoryLawn Mower
LanguageEnglish

Summary

Safety

How to Operate Safely

Instructions on safe operation procedures and precautions.

Important Safety Notes

Critical safety alerts and precautions for user protection.

Controls

Operator Alerts

Explanation of audible alarms and warning lights for machine status.

Operation

Daily Inspection

Procedures for daily pre-operation checks and visual inspection.

Interlock System

Explanation and testing of the safety interlock system.

Operating Procedures

General guidelines and precautions for operating the mower safely.

Mowing

Steps and precautions for performing mowing operations.

Hillside Operation

Safety guidelines and techniques for operating on slopes.

Daily Maintenance

Routine daily maintenance tasks to ensure proper functioning.

Maintenance & Lubrication Charts

Maintenance Chart

Schedule of recommended service and lubrication intervals.

Lubrication Chart

Visual guide to lubrication points and their frequencies.

Maintenance

Engine

Information on engine maintenance and break-in procedures.

Jump Starting

Safe procedures for jump-starting the mower's battery.

Roll Over Protective Structure (ROPS)

Inspection and maintenance of the ROPS for safety.

Reel Backlapping

Procedure for backlapping reels to restore cutting edge.

Adjustments

Bedknife-To-Reel

Pre-adjustment checks for reel and bedknife condition.

Bedknife Adjustment

Procedure for adjusting the bedknife gap to the reel.

Cutting Height

Steps to adjust the cutting height of the mower units.

Down Pressure

Adjusting down pressure for optimal cutting quality.

Brakes

Procedures for adjusting the mower's braking system.

Neutral Adjustment

Adjusting the drive pump for neutral position.

Troubleshooting

General

Common problems and solutions for start-up and operation.

Quality of Cut

Quality of Cut Troubleshooting

Steps to diagnose and improve cutting quality.

Related product manuals