Jacobsen ransomes frontline 930 User Manual

RJ 100 / 082002
WARNHINWEIS: Wenn diese Maschine nicht ordnungsgemäß
verwendet wird, können ernsthafte Verletzungen verursacht
werden. Personen, die diese Maschine verwenden und
warten, müssen in ihrer richtigen Verwendung ausgebildet
sein, auf die Gefahren aufmerksam gemacht worden sein
und die Anleitung ganz gelesen haben, bevor sie versuchen,
die Maschine aufzustellen, zu bedienen, einzustellen oder
zu warten.
WAARSCHUWING: Bij verkeerd gebruik kan deze machine
ernstig lichamelijk letsel veroorzaken. Degenen die de machine
gebruiken en onderhouden moeten worden getraind in het
juiste gebruik ervan, worden gewaarschuwd voor de
gevaren ervan en behoren de volledige handleiding
aandachtig te lezen alvorens de machine bedrijfs-klaar te
maken, te bedienen, af te stellen en/of te onderhouden.
AVERTISSEMENT : Risque de blessures graves en cas
d’utilisation incorrecte de la machine. Les opérateurs et le
personnel d’entretien doivent être formés et conscients des
dangers encourus. Ils doivent lire avec attention le manuel
avant d’essayer de monter, d’utiliser, de régler ou maintenir la
machine.
WARNING: If incorrectly used this machine can cause severe
injury. Those who use and maintain this machine should be
trained in its proper use, warned of its dangers and should
read the entire manual before attempting to set up, operate,
adjust or service the machine.
AVVERTENZA: Questa macchina può causare gravi infortuni
se viene utilizzata in modo errato. Prima di accingersi ad
approntare, usare, mettere a punto o eseguire la manutenzione
di questa macchina, coloro che la utilizzano ed i responsabili
della manutenzione devono essere addestrati all’impiego della
macchina, devono essere informati dei pericoli, e devono
leggere l’intero manuale.
24598G (rev.0)
Parts and Maintenance Manual
Nomenclature Des Pieces De Rechange
& Manuel De Maintenance
Onderhouds - En Onderdelenhandleiding
Wartungsanleitung Und Stückliste
Manuale Per La Manutenzione E Dei Ricambi
Frontline 960
Series: LQ
Engine Type: Perkins 404C-22T
Product Codes: LHAM001

Jacobsen ransomes frontline 930 Specifications

General

Brand	Jacobsen
Model	ransomes frontline 930
Category	Lawn Mower
Language	English

Summary

Introduction

Product Identification

Identifies key product information like machine name, serial number, and engine power.

Spares Stocking Guide

Recommends stocking commonly used maintenance items for operational productivity.

How to Use the Parts Manual

Explains how to interpret item numbers, assemblies, quantities, and ordering procedures.

Safety Instructions

Operating Instructions

Ensures operators are trained, familiar with controls and safety procedures.

Safety Signs

Emphasizes the importance of keeping safety labels legible and replacing them.

Starting the Engine

Details pre-start checks: brakes, neutral drive, guards, and bystander clearance.

Driving the Machine

Covers pre-operation checks, driving on roads, speed, obstructions, and blade status.

Transporting

Instructions for secure fastening of cutting units and considerations for transport conditions.

Working on Slopes

Provides critical warnings and guidance for operating on slopes, including a 15° limit.

Specifications

Engine Specification

Details the Perkins 45KW diesel engine type, model, speeds, and capacities.

Machine Specification

Outlines frame construction, cutting unit drive, transmission, speeds, and tyre details.

Dimensions

Lists width of cut, overall dimensions (width, height, length), and machine weight.

Vibration Level

Presents whole body and hand/arm vibration levels based on ISO standards.

Recommended Lubricants

Specifies engine oil, hydraulic oil, and grease types for optimal performance.

Torques

Provides recommended torque settings for various metric and UNC fasteners.

Lubrication and Maintenance

Lubrication and Maintenance Charts

Presents charts detailing engine and machine maintenance tasks and schedules.

Engine Maintenance (First 50/250 Hours)

Covers first 50 and every 250 working hours engine oil and filter change procedures.

Machine Lubrication (Weekly/40 Hours)

Details lubrication points for machine components like pivots and pulleys.

Machine Maintenance (Every 400 Hours)

Outlines tasks for 400-hour intervals, including hydraulic oil and filter changes.

Hydraulic Test Ports

Lists service ports for checking hydraulic system pressures.

Engine Maintenance (250/400 Hours)

Details engine maintenance for 250 and 400-hour intervals, including fuel filter.

Machine Maintenance (Regular)

Covers regular machine servicing like battery checks, tyre pressure, and bolt tightness.

End of Season Servicing

Provides instructions for end-of-season maintenance, including coolant change.

Adjustments

Speed Limiter

Notes that transport and mow speeds are factory set and should not be altered.

Rear Wheel Toe-In

Explains how to adjust rear wheel toe-in for proper alignment.

Alternator Belt Adjustment

Details how to adjust the fan belt tension for the alternator.

Cutter Deck Adjustments

Cutter Deck Belt Tension

Describes how to check and adjust belt tension for center and wing decks.

Blade Sharpening & Removal

Provides guidance on sharpening, balancing, and safely removing cutter blades.

Troubleshooting

General Troubleshooting Chart

Lists common problems, possible causes, and recommended actions for start-up and operation.

Schematics

Hydraulic Circuit Diagram

Illustrates the complete hydraulic system layout with numbered components.

Electrical Circuit Instrument

Diagram showing instrument panel wiring, including key switches and lamps.

Electrical Circuit Main

Detailed main electrical circuit diagram showing component connections.

Fuse Positions

Identifies locations and ratings of main and secondary fuses in the electrical system.

Relay Positions

Shows the location and identifies the function of various relays in the system.