To Next PageTo Next Page
Need help?Do you have a question about the Jacobsen HR700 and is the answer not in the manual?
General| Transmission | Hydrostatic |
|---|---|
| Number of Reels | 7 |
| Deck Type | Reel |
| Transmission Type | Hydrostatic |
| Turning Radius | 18 inches |
Essential safety principles and operator responsibilities for safe machine operation.
Precautions and procedures for safely handling and refueling the machine with fuel.
Safety procedures to follow before cleaning, adjusting, or repairing the equipment.
Key safety alerts, hazard definitions, and interlock system operation.
Detailed layout and identification of controls on the ROPS and Cabin panels.
Overview of the visual display system, including startup and warning screens.
Overview of warning screens displayed for faults, warnings, or hazards.
Detailed operation of the traction pedal for driving, stopping, and holding on slopes.
Identification and function of cabin control switches, indicators, and fuse holder.
Daily inspection checklist and precautions before starting the machine.
Testing and verification of the operator presence and safety interlock system.
Step-by-step guide for operating the mower, including safety precautions and slope limits.
General checks and adjustments for operating the machine, including seat positioning.
Step-by-step guide for starting the engine, including cold start procedures.
Instructions for driving the machine forward, reverse, and stopping using the traction pedal.
Procedure for engaging cutting units and mowing, including speed and terrain considerations.
Safety and operational guidelines for mowing on slopes, including stability and speed.
General safety precautions and guidelines for performing adjustments and maintenance.
General information on setting cutting height for all decks and specific procedures for front decks.
Detailed steps for adjusting the cutting height on the front cutter deck.
Instructions for adjusting cutting height on wing cutter decks and leveling the deck.
Charts detailing service intervals and fluid requirements for machine maintenance.
Schedule of engine maintenance tasks based on operating hours and intervals.
Information on engine operation, maintenance during the first 50 hours, and engine manual reference.
Procedures for checking engine oil level and changing engine oil and filter.
Procedures for checking, draining, and filling the engine cooling system with coolant.
Procedures for draining and replacing hydraulic oil and filter.
Procedure for replacing the hydraulic filter and removing air from the system.
Guidelines for safe fuel handling, storage, and checking fuel quality.
Procedures for draining water from the separator and bleeding air from the fuel system.
Procedure for checking, cleaning, and replacing the air cleaner elements.
Safety precautions for servicing the battery and procedures for jump-starting the mower.
Explanation of DPF operation, regeneration states, and warnings about exhaust temperatures.
Detailed instructions for changing the cutter blades on the front and all cutter decks.
Troubleshooting guide for common engine starting, stopping, and power loss issues.
Troubleshooting steps for engine overheating causes and solutions.
Steps to diagnose and resolve issues affecting the quality of grass cut.
Identification of fuse holders, fuses, and relays within the machine's electrical system.
Technical specifications for the Kubota V2403-CR-TE5 diesel engine.
Technical specifications for the machine, including frame, drive, speed, steering, and battery.
Maximum safe slope limits for operation with ROPS and Cab configurations.
