Jacobsen JMP653F Quick Start Guide

QUICK START GUIDE
en-12
HOW TO MOW
1. Release any transport locks and lower
the cutting units with the joysticks.
2. To engage the cutting mechanism,
press the upper half of the cutting unit
switch, found on the control panel.
3. Release the parking brake and drive in
a forward direction.
4. Set a speed compatible with the surface
and gradient you are cutting. When you
operate at speed, danger is increased
and the quality of cut will be
compromised.
When the optional Stability Warning
System is installed (TST)
When the mower is driven on a slope of more
than its safe limit 22º, a warning is shown on
the visual display unit
NOTE
Always set the throttle to the maximum engine speed. If you find wet or thick grass
difficult to cut, decrease the forward speed to increase hydraulic pressure to the
cutting motors.
NOTE
Always set the throttle to maximum engine speed to cut the grass. When the grass
is heavy or the engine is under stress, decrease forward speed on the forward/
reverse foot pedal.
MOWING

Jacobsen JMP653F Specifications

General

Brand	Jacobsen
Model	JMP653F
Category	Lawn and Garden Equipment
Language	English