en-114
10 QUALITY OF CUT
NOTE: The Arrow indicates direction of travel.
“Scalping” is a condition in which some areas are
cut shorter than the set height of cut. This results in
very short grass or brown areas. The cause is a low
height-of-cut (HOC) setting, rough surface.
Possible Cause Correction
The HOC (height-of-cut) settings are low for the
conditions.
Check and adjust the HOC settings.
The mower can not follow the ground in this direc-
tion.
Change the direction of cut.
You try to cut deep grass in one try. Increase the HOC.
Cutting at more than the recommended speed. Decrease the cutting speed.
TN0222
10.3 SCALPING ___________________________________________________________
To Next Page
Loading...
Need help?
General
