en-40
5 CONTROLS
5.2.Z.46 PIN CHANGE ___________________________________________________
Select the PIN change
and accept .
5.2.Z.47 NEW PIN _______________________________________________________
Press the button up and down to move forward the numbers.
Select . To accept.
5.2.Z.48 INCLINOMETER _________________________________________________
Select to shows TST status, Enabled or Disabled.
Press the button up and down to move between
Enabled or Disabled Select . To accept.
5.2.Z.49 DRIVE MODES __________________________________________________
Select to shows Drive Modes.
Press the button up and down to move between
Auto Mode Selectable, Manual Mode Selectable or
Creep Mode Selectable . To accept.
Press the button up and down to move between
Yes and No Selectable . To accept.
Pin Menu
Cruise Control
Cross Cut
Vehicle Speed
Change PIN
Pin Menu
Cruise Control
Cross Cut
Vehicle Speed
Change PIN
Inclinometer
Set Default Parameters
Drive Modes
TST Setting
TST Status Not Fitted
Change PIN
New PIN
0
Drive Modes
Auto Mode Selectable YES
Manual Mode Selctable No
Creep Mode Selectable Yes
Pin Menu
Cruise Control
Cross Cut
Vehicle Speed
Change PIN
Inclinometer
Set Default Parameters
Drive Modes
To Next Page
Loading...