JACT AT500-T3-011G - User Manual

AT500 User's Manual
1
Preface
Thank you for purchasing the AT500 series inverter developed by Wuxi JACT
Electric Co., Ltd.
The AT500 series inverter is a general-purpose high-performance current vector
control inverter. It can implement the control of asynchronous motor. It is used to
drive various automation production equipment involving textile, paper-making,
wire drawing, machine tool, packing, food, fan and pump.
This manual describes the correct use of the AT500 series inverter, including
selection, parameter setting, commissioning, maintenance & inspection. Read and
understand the manual before use and forward the manual to the end user.
Note matter

The drawings presented in this instructions are sometimes
shown without covers or protective guards.Always replace the equipment’s
cover or protective guard as specified first,and the operate the products in
accordance with the instructions.
 The drawings presented in the instructions are typical examples
and may not match the product you received.

These instructions are subject to change due to product
improvement,specification modification, specification modification.
 If you want to order the manual due to loss or damage, please
contact our company agents in each region or our company customer
service center directly.
 If there is still any problem during using the product, please
contact our company customer service center directly.
Our Service Hotline:0510-85380261
Fax:0510-85380361
24-hour technical service line:13306170378 13306170877

Summary

Preface

Note matter

Contains important warnings and disclaimers regarding manual usage and product specifications.

Chapter 1 Safety information and precautions

Security matters

Covers critical safety precautions for installation, wiring, and operation.

Before energizing

After energizing

Chapter 2 Product information

Product description of each part

Technical Specifications

Lists the key technical specifications of the AT500.

Appearance and installation dimensions

Wall-mounted mounting dimensions

Cabinet mounting dimensions

Chapter 3 Mechanical and electrical installation

Mechanical Installation

Guidelines for physical installation.

Installation Environment

Specifies the required environmental conditions for installation.

Electrical Installation

Guidelines for electrical installation and wiring.

Peripheral Electrical Devices

Describes necessary external electrical components.

Description of Peripheral Electrical Devices

Selection of Braking Unit and Braking Resistor

Selection of Power of Braking Resistor

Wiring of inverter Control Circuit

Details the wiring for the inverter's control circuit.

Main Circuit Terminal And The Wiring

Details wiring for the main circuit terminals.

Precautions on Wiring

Safety warnings and guidelines for wiring.

Control Terminals and Wiring

Details wiring for the control terminals.

Control terminal function

Chapter 4 Operating And Display

Operation and display interface

Overview of the inverter's operation and display interface.

Function indicator description

Digital display zone

Keyboard button description table

Viewing and Modifying Function Codes

Guide on navigating and changing parameters.

Selecting menu mode

How to navigate through different operating modes.

Chapter 5 Function Parameter List

Group F0:Basic functional parameter groups

Group F3:Output Terminals

Lists parameters for output terminals.

Group F7: Start;Stop Control Parameters

Lists parameters for start/stop control.

Group Fb: Swing Frequency, Fixed Length,Count and Torque Control and Restricting Parameters

Group Fd: Communication Parameters

Chapter6 Description of Function Codes

Group F0:Basic Function Parameters

Group F1: Motor parameters

Describes motor parameters.

Group F2:Input Terminal

Describes input terminal functions.

Group F3: Output Terminals

Group F4: Auxiliary Functions

Group F5: Vector Control Parameters

Describes vector control parameters.

Group F6: V;F Control Parameters

Describes V/F control parameters.

Group F7: Start;Stop Control

Describes start/stop control parameters.

Group F8: Operation Panel and Display Parameters

Describes panel and display parameters.

Group F9: Fault and Protection Parameters

Describes fault and protection parameters.

Group FA: Process Control PID Function

Group FB: Swing Frequency, Fixed Length,Count and Torque Control

Group FC: Multi-Reference and Simple PLC Function Parameters

Group H0: Monitoring Parameters

Chapter 7 Maintenance and Troubleshooting

Routine Repair and Maintenance of the AT500

General maintenance procedures for the AT500.

Routine Maintenance

Periodic Inspection

Replacement of Vulnerable Components

Faults and Solutions

Lists inverter faults and their corresponding solutions.

Common Faults and Solutions

Lists common faults and their troubleshooting steps.

JACT AT500-T3-011G Specifications

General

Brand	JACT
Model	AT500-T3-011G
Category	Inverter
Language	English