To Next PageTo Next Page
Need help?Do you have a question about the Jacuzzi Aura and is the answer not in the manual?
General| Jets | 35 |
|---|---|
| Voltage | 240V |
| Amperage | 50A |
| Shell Material | Acrylic |
| Dimensions | 84" x 84" x 36" |
| Heater | 4 kW |
| Cabinet Material | Synthetic |
Install taps and screw ring nuts with o-ring, referencing layout diagrams.
Run flexible hose under tub edge and screw in shower head with gasket.
Permanently attach the shower head support to the tub edge with screws.
Assemble drain column, connect siphon, and route hose to overflow connection.
Connect the flexible hose from the column to the overflow connection.
Insert the column control into the indicated hole and tighten the square cover.
Connect the equipotential terminal cable to the tap faston for safety.
