To Next PageTo Next Page
Need help?Do you have a question about the Jacuzzi Aura Series and is the answer not in the manual?
Verifying arrangements, unpacking, checking for defects, and ensuring clamp tightness before installation.
Placing, leveling, and adjusting the tub feet before permanent installation.
Instructions for assembling taps and fittings before the tub is fastened to the floor.
Connecting the siphon to the drain and making necessary electrical connections to the power supply.
Steps for installing various accessories like spotlights, suction covers, and jet nozzles.
Instructions for installing the optional perimeter light system on the tub.
Procedures for installing methacrylate, Aura Corner, and Nova Corner panels onto the tub.
Performing checks after installation, including hydromassage cycles and securing tub feet.
Guidelines for assembling heavy frames, including specific notes and warnings for material handling.
Steps for assembling the Corian® frame, including gasket application and proper fastening.
Instructions for re-assembling the deviator and control panel after servicing or maintenance.
Procedures for re-assembling the sanitising inlet and drain column control components.
Moving the tub to its final location and securely fastening the feet to the floor.
Applying silicone, glue, and removing spacers to complete the frame installation.
Applying protective products to the frame surface after installation for durability.
Guidelines for clients installing custom frames from wood or other materials.
Diagrams showing electrical connections for various Jacuzzi tub models and configurations.
A multilingual chart mapping component numbers to colors used in electrical diagrams.
Contact information for Jacuzzi Europe S.p.A. and its international subsidiaries for support.
Information regarding TÜVRheinland certification and general product disclaimers.
General