Page 74
J-400
7. Now you will need to adjust the lter
cycle “Duration” (Figure I). The
duration range is from 0 (OFF) to 120
minutes. Press the Left or Right
button on the Quad Keypad to make
your adjustments in increments of 15
minutes.
8. Press the Splash button on the Quad Keypad to save the
selection. Then press button D to return to the “Settings 2” Main
Menu (page 71) and continue on to the “Settings 3” Main Menu.
14.0 Programming Instructions for Settings 3 Menus
The “Settings 3” screen allows you to program the Language, Date and
Time and to Lock/Unlock the spa.
To access the “Settings 3” Menu:
1. From the “Settings 2” Menu (Figure A), press button B.
2. The “Settings 3” Menu will appear (Figure B).
= Language Icon : Press button A to access the Language
submenu.
= Time Icon : Press button C to access the Date and Time
submenus.
Note: The Date and Time submenu will default to the last submenu
accessed.
Figure I
SECONDARY
Start Time
Day Settings
Duration
Select
Press to Enter
3
Duration
OFF
D
C
B
A
Primary
Secondary
Press to
reset to default
SETTINGS 2
OFF
OFF
3
2
Figure A
C
B
A
D
Language
ENG
SETTINGS 3
3
5
4
3
Figure B
To Next Page
Loading...
Need help?
General
