Need help?Do you have a question about the Jadak Photo Research PR-810 and is the answer not in the manual?
Details standard accessories for PR-805, PR-810, and PR-810L models.
Details the 3.5" high-resolution, full-color touch screen display.
Explains the GUI structure with three main panes: Title bar, Active pane, Command bar.
Displays current menu location and critical system information status.
Lists and explains various icons indicating instrument status like battery, Bluetooth, and sync.
Explains the command bar buttons for navigation and control during measurements.
Details how to execute and navigate through measurements and results.
Displays serial number, calibration due date, and firmware version.
Identifies and describes the main I/O connectors on the instrument.
Details the 6-pin mini-DIN connector for external triggering.
Details the pin designations and provides sample circuits for trigger input/output.
Describes the AC adapter power supply connector and Li-ion battery operation.
Details the Mini-B USB connector for remote communication and charging.
Explains the optional RS-232 interface for traditional communications.
Describes the optional SMB jack for monitoring PMT signals.
Provides steps and setup for utilizing the Analog Output feature.
Illustrates and describes the battery compartment, eject button, and door latch.
Provides step-by-step instructions for inserting, removing, and charging the battery.
Instructions for installing and removing the standard objective lens.
Guidelines for storing the instrument and battery during extended periods.
Explains how the photometer works with a V(λ) filter and PMT detector.
Defines luminance as luminous flux per solid angle per unit area.
Defines illuminance as luminous flux incident on a surface per unit area.
Defines luminous intensity as luminous flux per unit solid angle.
Recommends screen calibration and battery charging before initial use.
Step-by-step guide to calibrate the PR-8XX touch screen display.
Guides on enabling/disabling power saving and setting auto-off timers.
Instructions for adjusting display brightness and contrast levels.
Explains how to enable or disable audible alerts like button clicks and shutter sounds.
Steps to set the instrument's date and time.
Procedure to restore instrument preferences and setup parameters to factory defaults.
Guides on necessary setup before taking measurements for accurate results.
Details the instrument setup screen and options for configuring the device.
Instructions for selecting aperture settings for PR-810 and PR-810L.
Guides on selecting primary and add-on accessories for measurements.
Explains how to set the number of measurements to average for improved results.
Instructions for setting Neutral Density filters and gain levels.
Details on enabling the Adaptive Sensitivity™ algorithm for Gain and ND filter.
Explains setting maximum exposure time for low light measurements on PR-810L.
Guides on selecting filter bandwidth for signal averaging.
Steps to enable and use the optional analog output feature.
Instructions for setting the measure shutter to remain open or close after measurement.
Accesses SD card settings: Auto Save, file naming, and prompts.
Details how to configure auto-save and manage measurement files on SD card.
Step-by-step guide to create and name new measurement files on the SD card.
Instructions for deleting and renaming measurement files on the SD card.
Explains the prompt to save unsaved RAM measurements before shutting down.
Configures memory location (RAM/SD) and file name for viewing measurements.
Guides on selecting memory location and viewing files in the file explorer.
Defines luminance and its applications, including measurement with lenses/probes.
Step-by-step guide to align, focus, and perform a luminance measurement.
Detailed steps for aligning and focusing the optical system with objective lenses.
Step-by-step guide to install and use the CR-8XX for illuminance measurements.
Provides instructions for cleaning and handling the reflectance standards.
Defines luminous intensity and its calculation from radiant intensity.
Step-by-step guide for installing and making measurements with the LR-55.
Steps to perform measurements using the LR-127 for luminous intensity.
Instructions for installing the IS-8xx integrating sphere accessory.
Guides on mounting the LED and adjusting the tube height within the sphere.
Steps to perform measurements using the IS-8XX integrating sphere.
Guides on setting the time interval between measurements.
Instructions to initiate and perform continuous measurements.
Steps to manually enter a correction factor for PMT calibration.
Guides on performing a one-time calibration using a known source.
Procedure to restore calibration factors and illuminant files to factory defaults.
Steps for updating the instrument's firmware using an SD card.
Explains USB connection for remote communication and charging.
Step-by-step guide for installing the USB driver on Windows XP.
Guides on setting USB hub type for optimal power delivery.
Steps to check USB hub power availability in Windows XP.
Information on optional Bluetooth feature for wireless control.
Steps to install the Bluetooth adapter drivers on the host PC.
Guides on enabling, disabling, and understanding Bluetooth modes.
Explains how to make the instrument discoverable for pairing.
Step-by-step guide to pair the PR-8XX with a remote host via Bluetooth.
Guides on selecting the appropriate baud rate for RS-232 communication.
Guides on using HyperTerminal for remote control commands.
Provides detailed syntax, purpose, and response for each command.
Summarizes Data Codes and their meanings for instrument communication.
Provides detailed examples of Data Codes and their output formats.
Guidelines for cleaning optical components to maintain performance.
Instructions for cleaning the instrument's exterior surfaces.
Recommendations for periodic recalibration to maintain accuracy.
Details on in-warranty and out-of-warranty repair procedures.
Lists detailed technical specifications for the PR-810L model.
Lists detailed technical specifications for the PR-810 model.
Lists detailed technical specifications for the PR-805 model.
General| Brand | Jadak |
|---|---|
| Model | Photo Research PR-810 |
| Category | Measuring Instruments |
| Language | English |
To Next Page
