Jadens JD-168 - Label Size Requirements; Loading Labels into Printer

Label with a width range from 1.57" to 4.1", length over 1.18''.
Normal paper is not applicable! Must be THERMAL LABEL!
Ideal for 4’’*6’’
Paper size can be selected in Windows and MacBook both.
Label standard size
Ensure the printer is off
Pull the release latch to open the cover
1
2
Ensure the print layer of label face
in case print out blank labels.
Put the roll label in or insert the fan-fold
label from outside, adjust the paper guide
to fit the width of paper.
3
Note:
up
5. How to feed label
See Q&A on support site of www.jadens.com