See FAQ at support.jadens.com
12. Frequently asked question
Go to support.jadens.com to see FAQ
HOWcan we help you tcx*0Y?
13. Pro tips
- Anytime you change label size, run the automatic label identification by pressing and holding
the feed button until you hear one short beep.
- Press the feed button on the printer to skip a blank label.
-To run a self-test, press and hold the feed button until you hear two short beeps.
- Avoid using poor quality labels as they can damage the printer.
- Regularly clean the printer head as described in 17. MAINTENANCE.
- If paper is jammed, turn off the printer, and allow the printer head to cool down. Open the cover
and ensure that the rubber is clean. If dirty, use alcohol pad to clean. Allow the area to dry off
before turning the printer on.
14. Driver removement
For windows:
Open the driver again and follow below steps to uninstall the driver.
1.31'
[Tirdtall printerdriver
R printer driver
For Mac:
Click 'System Preferences' > 'Printer& Scanners', click 'JADENSJD-328BT' > '
20
' > 'Delete Pinter'.
To Next Page
Loading...