27
A few clockwise turns of the crown are enough
to start your watch.
It will then automatically wind up when you
wear it. Please note that the crown does not
lock when winding, even when the watch is
fully wound.
SETTING THE TIME
Pull the crown out to position 1.
The movement is then locked ("stop seconds"
function). To enable precise time-setting to
the nearest second, stop the seconds hand at
60. Move the hands forward clockwise to the
desired time and, on the hour signal, push the
crown back to position 0. The watch starts
running again.
SETTING THE DAY, DATE, MONTH, AND
MOON PHASE
The day, date, month, and moon-phase
adjustments can be carried out by pressing
the correctors A, B, C and D using the stylus
provided with your watch.
ENGLISH
To Next Page
Loading...
