Jaeger-leCoultre Polaris Geographic WT - Setting the Hour, Minutes, and Seconds (Local Time); Setting the Date

33
ENGLISH
SETTING THE HOUR, MINUTES, AND
SECONDS (LOCAL TIME)
Pull Crown A out to position 2. The movement
is then locked (“stop seconds” function).
For an exact setting, position the seconds hand
at 12 o’clock.
Move the hands clockwise to the desired time,
by passing 12 o’clock. If the date changes, it is
midnight; if not, it is midday.
When the operation is complete, push the
crown back to position 0. The watch starts
running again.
SETTING THE DATE
By pressing corrector C with the tool supplied
with your watch, advance the date manually
until the correct date is displayed.
Note: never try to adjust the date between the
hours of 8.30 pm and 3.30 am. This is because
the automatic date-change mechanism is
already in action between these times.