32
To move the diving bezel, you need only grip it with two ngers and turn it anti-
clockwise to the desired position.
Adjusting the wristlet
Note: The wristlet illustrations below may not correspond to either your
wristlet or your watch, but the demonstration illustrated is completely identi-
cal and valid.
Adjusting the clasp
The clasp on metal bracelets and articulated rubber straps is tted with an ad-
justment system enabling you to lengthen or shorten your wristlet by 4 mm on
either side, for greater wearer comfort.
Using the ne adjustment system
Transition from the long position to the short position:
Remove your watch.
Hold your clasp open between the thumb and forenger of one hand, with the
wristlet section in your other hand (g. 1).
Fig. 1
To Next Page
Loading...
Need help?
General
