Daily, by a trained user :
1. Empty the crumb collector ;
2. Use a slightly damp cloth for external maintenance ;
3. Open the table in front to clean on the inside.
Every 25.000 cuts and/or at least 1 time a year, by an authorised agent :
1. Remove the plug ;
2. Replace the blades (see blade changing procedure) ;
NB : Don’t over tighten the blades because there is a risk of deforming the frame ;
3. Clean with a brush and vacuum the inside of the machine ;
4. Check the state of the bearings ;
5. Lubricate the guides.
Check that your authorised agent records the intervention in your service book in
order to keep your 3 year warranty
Additional maintenance for models with oiling system
The oil to use is : 7940019 (as mentioned in the JAC “spare parts“ catalogue)
Or food liquid vegetable oil with natural antioxidant
Daily, by a trained user :
1. Check that you don’t have to add oil into the lubrication + tank
(not in the trolley with the felt).
Every 1000 cuts or every 15 days, by a trained user :
1. Add the necessary dose of edible oil (100 to 150 ml) necessary to imbibe trolley felt ;
2. Check the tank (optional) oil level.
Every 25.000 cuts and/or at least 1 time a year, by an authorised agent :
1. Remove the plug ;
2. Replace the felts of the pusher ;
3. Replace the bread pressing felt (machine equipped with the LUBRICATION +option).
8
MAINTENANCE
To Next Page
Loading...
Need help?
General