Need help?Do you have a question about the Jaga CLIMA CANAL and is the answer not in the manual?
General| Water Temperature Range | Up to 90°C |
|---|---|
| Maximum Working Pressure | 10 bar |
| Housing Material | Galvanized steel |
| Heating Medium | Water |
| Heat Exchanger Material | Copper tubes with aluminum fins |
| Noise Level | Low noise operation |
Overview of JDPC controller options and their features, including water sensors and control panels.
Technical overview of the JDPC.002 module for Option 01.
Default heating, cooling, and fan speed settings for Option 01.
How the device is controlled by water temperature in Option 01.
Technical overview of the JDPC.002 module for Option 02.
Default heating, cooling, and fan speed settings for Option 02.
Warning against changing factory dipswitch settings for Option 02.
Control operations for JDPC with control panel, including heating and cooling.
Technical overview of the JDPC.002 module for Option 03 with 0-10V input.
Default heating and cooling settings for Option 03.
Explanation of fanspeed curves versus 0-10V input for Option 03.
How the device is controlled by the home control system for Option 03.
Indicates error conditions for JDPC options, specifically sensor errors.
Procedure to change the factory preset minimum temperature for heating.
How to adjust the factory preset maximum temperature for cooling.
Instructions for adjusting fanspeed for Options 01 and 03.
How to adjust fanspeed in heating mode for Option 02.
How to adjust fanspeed in cooling mode for Option 02.
Steps to reset the JDPC controller to its original factory settings.
To Next Page
