HAMMER – operator's manual/instrukcja użytkownika
- 5 -
After entering settings of the machine, the number of particular option appears on the credit display. Using
SETUP button you can move between the options. Pressing SETUP VALUE button you enter the particular
option and immediately by using the same SETUP VALUE button change its parameters. To accept changes
press SETUP button and automatically you will forward to the next option.
- entering option
- changing value of particular option
- moving between options
- accepting the changes
Changing credits settings:
• option 1-4 coin acceptor channels
• option 5-7 banknote acceptor channels
DISPLAY 1 – Setting the number of credits received for each coin.
DISPLAY 2 – Setting coin value.
Example: Option 1, on Display 1 set value 1, and on Display 2 set value 0.5
means that 0,50€ the player will receive 1 game.
0,50€ – 1 game
1€ – 2 games
2€ – 5 games
Time of repeating presentation:
DISPLAY 1 – change from 5 to 60min
Resetting the current record:
Display 1 – the value of the current record. To reset the current record press
button SETUP. The current record will be reset to basic parameter – 550.
Strength characteristics:
Changing the beats strength.
Display 1 – change from 90% to 110%
Non erasable - electronic counter:
The number of pulses from the beginning of the machine's production.
It is not possible to change it.
Current electronic counter:
The number of pulses from the last account has been made. Can be reset.
Display 1 – Resetting the current electronic counter.
Test credits:
The number of credits for test purpose from the beginning of the machine's
production.
Display 1 – Setting credits for test.
Basic parameters:
Basic values set by the producer. Cannot be changed.
• Time of repeating presentation
• Record
• Strength characteristics
• Credits
To Next Page
Loading...
