HAMMER – operator's manual/instrukcja użytkownika
- 6 -
To reset the machine to the basic/factory settings press SETUP button. While
pressing SETUP button the changes will be done automatically without
showing information on the display.
Language:
Only for producer's use.
FREE PLAY:
Display 1:
0 – off
1 – on
Options of ticket dispenser
Automatic reset of the record:
Display 1:
• 0 – off
• 1 – Standard option, which means that values of options 27, 28, and
29 are set by the producer. For 27 (950), 28 (20), i 29 (550).
• 2 – Set option, appears if any value of Standard option in 27, 28 or 29
is changed manually by the operator.
Resetting of the record takes place during presentation time (option 12 –
Time of repeating presentation).
Example: If presentation is turned on every 10 min, after that time the record
will be reset automatically.
To option 26:
Reached Record
Display 1 – The value of the record, which needs to be reached so the option
number 28 – Games Counter activates. When Reached Record (option
number 27) and Games Counter (option number 28) are reached, the record
will be reset automatically during presentation.
Important: If Games Counter (option nr 28) is turned on 0 then the record is
reset automatically only after the record set in Reach Record is beated.
Change from 500 to 950.
To option 26:
Games Counter:
Display 1 – The number of games after which the record will be set
automatically.
Change from 0 to 50.
To option 26:
Initial value of record:
Display 1 – The initial value of record which will be set automatically when
the Reached Record (option 27) and Games Counter (option 28) are reached.
Change from 500 to 950.
Example: Option 26 = 1; 27 = 950; 28 = 20; 29 = 600:
After reaching a result higher than 950 and playing 20 games from that
moment, the record will be reset automatically and set to 600.
Attention: Resetting of the record takes place during presentation time
(option number 12 - Time of repeating presentation). If presentation is turned
on every 10 min, after that time the record will be reset automatically.
To Next Page
Loading...
